An version which has notch on cap in order to work directly with high density 10mm wide LED strip light. Such as 120 x SMD3528, 72 x SMD5050, 72 x SMD5630,and 120 x SMD2835,etc.

snap led strip light connector notch series for 5050 10mm single color
snap led strip light connector notch series for 5050 10mm single color
Model NO.TypesPosition
OL11-SRN10XB-2Strip to powerbetween strip and power supply.
OL11-SRN10BB-2Strip to strip jointbetween two strips, without wires.
OL11-SRN10BXB-2Strip to strip bridgebetween two strips, with wire.

  • Solderless connection
  • Very easy to use
  • Directly connect to high density strip light (Cut strip along scissor mark, not affect neighbor light group)
  • Support bigger current compared with similar products on market
  • UL94v-0 rated housing material
  • Good wire used
Workable LED Strip

All the workable LED strip listed below are non-waterproof, 10mm wide, single color with 2 solder pad

LED TypeLED lights per meterRemark
SMD5050, SMD5630, SMD283530LEDs/Meter~72LEDs/Meter
SMD2835120LEDs/MeterClick here to check how to !
Technical Data
Item NO.OL11-SR10XB-2NOL11-SR10BXB-2NOL11-SR10BB-2N
TypeStrip to powerstrip to strip / board to board bridgestrip to strip / board to board joint
Standard Wire Length15CM. ( customized wire length is acceptable )/
Workable Wire Gauge22 ~20 AWG/
Workable Wire Cross Sectional Area0.34~0.5 mm²/
Wire Color OrderBlack & Red/
Pin Pitch4.8 mm
Working VoltageDC3V~24V
Rated Current 3A
Polarity QTY2
Min.LED Strip Thickness>0.2mm
Housing ColorWhite
Housing MaterialNylon66
Pin MaterialPhosphor Copper (Cu)
Flame Retardant LevelUL94v-0