A 5-pin solderless strip light connector for RGB+white, RGB+Y and all other non-waterproof types which have 4 LED color. It is safe and easy to use. Made of UL94v-0 material which is safe in case of fire. A plastic wall between each wire terminal holder to prevent connector from short connection while shaking or twisting. Stable current carrying with help of optimized pin. Various wire color order for option to match different strip light color order like Black-Green-Red-Blue-White, Black-Green-Red-White-Blue,etc. It is a necessary accessory you need to use in your LED strip light installation.

Models
Model NO. | Types | Strip Light Width | Position |
---|---|---|---|
SR12XB-5 | Strip to power | 12mm | between strip and power supply. |
SR12BB-5 | Strip to strip joint | 12mm | between two strips, without wires. |
SR12BXB-5 | Strip to strip bridge | 12mm | between two strips, with wire. |
SR10XB-5 | Strip to power | 10mm | between strip and power supply. |
SR10BB-5 | Strip to strip joint | 10mm | between two strips, without wires. |
SR10BXB-5 | Strip to strip bridge | 10mm | between two strips, with wire. |
Features
- Solderless design, easy to use.
- Fixing strip light strongly.
- Stable current carrying to avoid micro electrical spark.
- Support bigger current compared with similar products on market
- Good wire used
- Safe material,UL94v-0 rated material.
Workable LED Strip
All the workable LED strip listed below are non-waterproof, 10mm/12mm wide, rgbw or rgby with 5 solder pads
LED Type | LED lights per meter | Remark |
---|---|---|
RGBW 4 in 1 | 30LEDs/Meter~60LEDs/Meter | |
RGB+White or RGB+yellow Mix | 30LEDs/Meter~60LEDs/Meter |
Technical Data
Item NO. | SR12XB-5 | SR10XB-5 | SR12BXB-5 | SR10BXB-5 | SR12BB-5 | SR10BB-5 |
---|---|---|---|---|---|---|
Type | Strip to power | Strip to power | Strip to strip / board to board bridge | Strip to strip / board to board bridge | Strip to strip / board to board joint | Strip to strip / board to board joint |
Workable LED Strip Width | 12mm | 10mm | 12mm | 10mm | 12mm | 10mm |
Standard Wire Length (if have) | 15CM. ( customized wire length is acceptable ) | / | / | |||
Workable Wire Gauge (if have) | 22 AWG | / | / | |||
Workable Wire Cross Sectional Area (if have) | 0.34 mm² | / | / | |||
Wire Color Order | Black-Green-Red-Blue-White (accept customization) | / | / | |||
Pin Pitch | 2.4 mm | 2.0 mm | 2.4 mm | 2.0 mm | 2.4 mm | 2 mm |
Working Voltage | DC3V~24V | |||||
Rated Current | 3.5A | |||||
Pin QTY | 5 | |||||
Housing Color | White | |||||
Min.LED Strip Thickness | >0.2mm | |||||
Housing Material | Nylon66 | |||||
Pin Material | Phosphor Copper (Cu) | |||||
Flame Retardant Level | UL94v-0 |