Hippo-M Solderless RGB LED Strip Connector is designed for 10mm wide 5050 color changing strip light with 4 Solder pad on FPC. Not only constant voltage 12V/24V types but also IC controlled strip. Flame retardant PC housing with 4 low-resistant copper conductors make it possible to coolly run under 5A current in total. And patent IDC terminal design makes splicing such easy and convenient to both strip-to-wire and strip-to-strip application. The workable LED density is from 30LEDs to 90LEDs per meter.

Available Models
Hippo-M RGB LED Strip Connector 10mm 4 pin for IP20 non-waterproof
Hippo-M RGB LED Strip Connector 10mm 4 pin for IP20 non-waterproof
1. For Non-waterproof
Model NO.TypesConnective Position
OL11-SEN10XB-4Strip to wire for IP20Between strip and wire
OL11-SEN10BB-4Strip to strip joint for IP20Between two strips, without wires


[recaptcha]

Close
Hippo-M RGB LED Strip Connector 10mm 4 pin for rgb IP54 IP65 waterproof
Hippo-M RGB LED Strip Connector 10mm 4 pin for rgb IP54 IP65 waterproof
2. For Waterproof
Model NO.TypesConnective Position
OL11-DJN10XB-4Strip to wire for for IP65/IP54Between strip and wire
OL11-DJN10BB-4Strip to strip joint for IP65/IP54Between two strips, without wires


[recaptcha]

Close
Features
  • Allow user to attach wire according project requirement.(Wire Color, Cross Section, length,etc)
  • No need stripping wire insulation when splicing flat ribbon cable
  • No need remove surface coating layer of waterproof strip light
  • Good for high density light LED strip,clear cover won’t mask light of first LED.
  • Gripping LED strip very reliably
How to use

Strip end operation

hippo-m SEN10-4--1 Cut LED Strip along the cuttable mark
1-1: Cut LED Strip along the cuttable mark
hippo-m SEN10-4--2 Remove protective paper of adhesive tape
1-2: Remove protective paper of adhesive tape
hippo-m SEN10-4--3 Insert LED strip to strip holder and press cap down
1-3: Insert LED strip to strip holder and press cap down
hippo-m SEN10-4--4 Finish connection to LED Strip
1-4: Finish connection to LED Strip

Wire end operation (if have)

hippo-m SEN10-4--5 Insert wire to wire holder of connector
2-1: Insert wire to wire holder of connector
hippo-m SEN10-4--6 Down close cap of connector
2-2: Down close cap of connector
hippo-m SEN10-4--7 Ensure cap is locked by base of connector
2-3: Ensure cap is locked by base of connector
hippo-m SEN10-4--8 Connection completed
2-4: Connection completed

Note: Above demonstration is about non-waterproof version, waterproof version is so similar.

Workable LED Strip

Include Common LED Strip and Dream Color Digital LED Strip

–Common RGB LED Strip Light–

  • LED Types: SMD5050, SMD3528
  • LED Quantity Supported: 30~90 LEDs/Meter

–Pixel LED Strip–

Pixel IC Types: WS2813

LED Quantity Per Meter: <=72 LEDs/M

All LED strips listed above have 4 Soldering Pads on 10mm wide FPCB

Technical Data
Item Name
Hippo-M Solderless Tape Light Connector for RGB
Item NO.OL11-SEN10XB-4OL11-DJN10XB-4OL11-SEN10BB-4OL11-DJN10BB-4
Strip light protectionIP20IP65/IP54IP20IP65/IP54
Typesstrip to wirestrip to strip joint
Workable Wire Gauge22 ~20 AWG/
Workable Wire Cross Sectional Area0.34~0.5 mm²/
Workable Wire ODMax 2.1 mm/
Pin Pitch2.5 mm
FPC Thickness Range>0.2mm
Polarity QTY4
Way of Contactinsulation-piercing contact
Working VoltageDC3V~24V
Rated Current 5A
Pin MaterialPhosphor Copper (Cu)
Housing MaterialPC
Housing Color (cap/base)Transparent / Black
Flame Retardant LevelUL94v-0

Remark: The data above are tested under 25℃.

Dimensional Drawing of SEN10XB-4
Dimensional Drawing of SEN10XB-4
Dimensional Drawing of SEN10BB-4
Dimensional Drawing of SEN10BB-4
Dimensional Drawing of DJN10XB-4
Dimensional Drawing of DJN10XB-4
Dimensional Drawing of DJN10BB-4
Dimensional Drawing of DJN10BB-4

Unit: mm