Hippo-M RGBW LED Strip Connector 5 Pin 12mm is workable to both RGB+White SMD and RGBW 4-in-1 tape light.  Both IP20 and IP65/IP54 available including strip-to-wire and strip-to-strip-joint types.

Available Models
Hippo-M LED Strip Connector 12mm 5 pin for rgbw IP20 non-waterproof
Hippo-M LED Strip Connector 12mm 5 pin for rgbw IP20 non-waterproof
1. For Non-waterproof
Model NO.TypesConnective Position
OL11-SEN12XB-5Strip to wire for IP20Between strip and wire
OL11-SEN12BB-5Strip to strip joint for IP20Between two strips, without wires

Close
Hippo-M LED Strip Connector 12mm 5 pin for rgbw IP54 IP65 waterproof
Hippo-M LED Strip Connector 12mm 5 pin for rgbw IP54 IP65 waterproof
2. For Waterproof
Model NO.TypesConnective Position
OL11-DJN12XB-5Strip to wireBetween strip and wire
OL11-DJN12BB-5Strip to strip jointBetween two strips, without wires

Close
Features
  • Allow user to attach 5 conductor flat wire according project requirement (Wire Color, Cross Section, length,etc)
  • Support big current
  • Good for high density light LED strip,don’t mask light of first LED.
  • Gripping LED strip very reliably
How to use

Strip end operation

hippo-m SEN12-5-1 Cut LED Strip along the cuttable mark
1-1: Cut LED Strip along the cuttable mark
1-2: Remove protective paper of adhesive tape
1-3: Insert LED strip to strip holder and press cap down
1-3: Insert LED strip to strip holder and press cap down
1-4: Finish connection to LED Strip

Wire end operation (if have)

2-1: Insert wire to wire holder of connector
2-2: Down close cap of connector
2-3: Ensure cap is locked by base of connector
2-4: Connection completed

Note: above operation is about non-waterproof version, waterproof types are such similar.

Workable LED Strip
  • LED Types: RGBW / RGB+White4
  • LED Quantity Supported: 30~90 LEDs/Meter

All LED strip listed above are RGBW with 5 soldering pads on 12mm wide FPCB

Technical Data
Item Name
Hippo-M 5 pin for RGBW 12mm
Item NO.OL11-SEN12XB-5OL11-DJN12XB-5OL11-SEN12BB-5OL11-DJN12BB-5
Strip ProtectionIP20IP65/IP54IP20IP65/IP54
TypeStrip to wireStrip to strip joint
Workable Wire Gauge22 AWG/
Workable Wire Cross Sectional Area0.34 mm²/
Workable Wire ODMax 2.1 mm/
Pin Pitch2.4mm
Way of Contactinsulation-piercing contact
Working VoltageDC3V~24V
Rated Current 5A
Polarity QTY5
Housing Color (cap/base)Transparent / Black
Min.LED Strip Thickness>0.2mm
Housing MaterialPC
Pin MaterialPhosphor Copper (Cu)
Flame Retardant LevelUL94v-0

Remark: The data above are tested under 25℃.

Dimension Drawing of SEN12XB-5
Dimension Drawing of SEN12XB-5
Dimension Drawing of SEN12BB-5
Dimension Drawing of SEN12BB-5
Dimensional Drawing of DJN12XB-5
Dimensional Drawing of DJN12XB-5
Dimensional Drawing of DJN12BB-5
Dimensional Drawing of DJN12BB-5

Unit: mm