Hippo-M 3 Pin LED Strip Connectors for 10mm Dual Color / Dimmable CCT

3 Pin LED Strip Connectors is made for 10mm wide dual color / dimmable CCT strip light connection such as SMD5050, SMD5630, SMD2835,SMD5730,and SMD3014,etc. The workable LED density is from 30LEDs to 120LEDs per meter.

Available Models

Hippo-M LED Strip Connector 10mm 3 pin for dual color CCT IP20 non-waterproof

1. For Non-waterproof

Model NO.	Types	Connective Position
OL11-SEN10XB-3	Strip to wire for IP20	Between strip and wire
OL11-SEN10BB-3	Strip to strip joint for IP20	Between two strips, without wires

Hippo-M LED Strip Connector 10mm 3 pin for dual color CCT IP54 IP65 waterproof

2. For Waterproof

Model NO.	Types	Connective Position
OL11-DJN10XB-3	Strip to wire	Between strip and wire
OL11-DJN10BB-3	Strip to strip joint	Between two strips, without wires

Features

Allow user to attach 3 conductor wire according project requirement.(Wire Color, Cross Section, length,etc)
Support big current that is up to 5A
Good for high density light LED strip,don’t mask light of first LED.
Gripping LED strip very reliably

How to use

Strip end operation

hippo-m SEN10-3--1 Cut LED Strip along the cuttable mark — 1-1: Cut LED Strip along the cuttable mark

hippo-m SEN10-3--2 Remove protective paper of adhesive tape — 1-2: Remove protective paper of adhesive tape

hippo-m SEN10-3--3 Insert LED strip to strip holder and press cap down — 1-3: Insert LED strip to strip holder and press cap down

hippo-m SEN10-3--4 Finish connection to LED Strip — 1-4: Finish connection to LED Strip

Wire end operation (if have)

hippo-m SEN10-3--5 Insert wire to wire holder of connector — 2-1: Insert wire to wire holder of connector

hippo-m SEN10-3--6 Down close cap of connector — 2-2: Down close cap of connector

hippo-m SEN10-3--7 Ensure cap is locked by base of connector — 2-3: Ensure cap is locked by base of connector

hippo-m SEN10-3--8 Connection completed — 2-4: Connection completed

Note: above operation is about non-waterproof version, waterproof types are similar

Workable LED Strips

Include Common LED Strip and Pixel LED Strip

–Common Dual Color / CCT LED Strip–

LED Types: SMD5050, SMD5630, SMD5730, SMD335, SMD3535
LED Quantity Supported: 30~90 LEDs/Meter

–Pixel LED Strip–

Pixel IC Types: WS2811/ WS2812/ WS2812B/ WS2813/ SK6812

LED Quantity Per Meter: <=72 LEDs/M

All LED strips listed above have 3 Soldering Pads on 10mm wide FPCB

Technical Data

Item Name	Hippo-M 3 Pin Dimmable LED Strip Light Connector for Dual Color / CCT 10mm
Item NO.	OL11-SEN10XB-3	OL11-DJN10XB-3	OL11-SEN10BB-3	OL11-DJN10BB-3
Strip Protection	IP20	IP65/IP54	IP20	IP65/IP54
Type	Strip to wire		Strip to strip joint
Workable Wire Gauge	22 ~20 AWG		/
Workable Wire Cross Sectional Area	0.34~0.5 mm²		/
Workable Wire OD	Max 2.1 mm		/
Polarity QTY	3
Pin Pitch	2.9mm
Way of Contact	insulation-piercing contact
Working Voltage	DC3V~24V
Rated Current	5A
Housing Color (cap/base)	Transparent / Black
Min.LED Strip Thickness	>0.2mm
Housing Material	PC
Pin Material	Phosphor Copper (Cu)
Flame Retardant Level	UL94v-0

Remark: The data above are tested under 25℃.

Unit: mm

Hippo-M 3 Pin LED Strip Connectors for 10mm Dual Color / Dimmable CCT

Hippo-M 3 Pin Dimmable LED Strip Light Connector for Dual Color / CCT 10mm