Designed for 5mm wide non-waterproof single color light LED strip that is IP20 rated, such as SMD3528, SMD3014, SMD2835,SMD2216,etc. The workable LED quantity is from 30LEDs to 120LEDs per meter.
|OL11-SEN5XB-2||Strip to wire||User can attach wire to it|
|OL11-SEN5BB-2||Strip to strip joint||between two strips, without wires.|
- Allow user to attach wire according project requirement.(Wire Color, Cross Section, length,etc)
- Support big current
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very reliably
Strip end operation
Wire end operation (if have)
- LED Types: SMD2835, SMD3528, SMD3014, SMD2216
- LED Quantity Supported: 30~120 LEDs/Meter
All LED strips listed above are Single Color, Non-waterproof with 2 soldering pads on 5mm wide FPCB
|Item Name||Hippo-M for Single Color 5mm IP20|
|Item NO.||OL11-SEN5XB-2; OL11-SEN5XB-2|
|Types||OL11-SEN5XB-2:Strip to wire; OL11-SEN5BB-2:Strip to strip|
|Way of Contact to Strip Light||insulation-piercing contact|
|Housing Color (cap/base)||Transparent / Black|
|Min.LED Strip Thickness||>0.2mm|
|Workable Wire Gauge (if have)||22 ~20 AWG|
|Workable Wire Cross Sectional Area (if have)||0.34~0.54 mm²|
|Workable Wire OD (if have)||Max 2.1 mm|
|Pin Material||Phosphor Copper (Cu)|
|Flame Retardant Level||UL94v-0|
Note: The datas are tested under 25℃.