Specially designed for 12mm high density LED strip like 3528 / 2835 240LEDs/M, 5050 96LEDs/M and 3014 288LEDs/M, etc. More workable strip modle, please refer to the ‘workable strip list ‘ below.

Hippo-M 240 high density LED strip connector 12mm 2 pin for single color IP20 non-waterproof
Hippo-M 240 high density LED strip connector 12mm 2 pin for single color IP20 non-waterproof
Models
Model NO.TypesDescription
OL11-SEN12XB-2GStrip to wireUser can attach wire to it
OL11-SEN12BB-2GStrip to strip jointbetween two strips, without wires.

Close
Features
  • Allow user to attach wire according project requirement.(Wire Color, Cross Section, length,etc)
  • Support big current
  • Good for high density light LED strip,don’t mask light of first LED.
  • Gripping LED strip very reliably
How to use

Strip end operation

hippo-m SEN12-2G-1 Cut LED Strip along the cuttable mark
1-1: Cut LED Strip along the cuttable mark
hippo-m SEN12-2G-2 Remove protective paper of adhesive tape
1-2: Remove protective paper of adhesive tape
hippo-m SEN12-2G-3 Insert LED strip to strip holder and press cap down
1-3: Insert LED strip to strip holder and press cap down
hippo-m SEN12-2G-4 Finish connection to LED Strip
1-4: Finish connection to LED Strip

Wire end operation (if have)

hippo-m SEN12-2G-5 Insert wire to wire holder of connector
2-1: Insert wire to wire holder of connector
hippo-m SEN12-2G-6 Down close cap of connector
2-2: Down close cap of connector
hippo-m SEN12-2G-7 Ensure cap is locked by base of connector
2-3: Ensure cap is locked by base of connector
hippo-m SEN12-2G-8 Connection completed
2-4: Connection completed
Workable LED Strip
  • LED Types: SMD5050, SMD5630, SMD5730, SMD335, SMD3535
  • LED Quantity Supported: 30~288 LEDs/Meter

All LED strips listed above are Single Color, Non-waterproof with 2 Soldering Pads on 12mm wide FPCB

Technical Data
Item Name
Hippo-M for Single Color 12mm IP20
Item NO.OL11-SEN12XB-2G;   OL11-SEN12BB-2G
Pin Pitch9.6 mm
Way of Contact to Strip Lightinsulation-piercing contact
Working VoltageDC3V~24V
Rated Current 5A
Polarity QTY2
Housing Color (cap/base)Transparent / Black
Min.LED Strip Thickness>0.2mm
Workable Wire Gauge (if have)22 ~18 AWG
Workable Wire Cross Sectional Area (if have)0.34~0.75 mm²
Workable Wire OD (if have)Max 2.1 mm
Housing MaterialPC
Pin MaterialPhosphor Copper (Cu)
Flame Retardant LevelUL94v-0

Remark: The data above are tested under 25℃.

Dimensional Drawing of SEN12XB-2G
Dimensional Drawing of SEN12XB-2G
Dimensional Drawing of SEN12BB-2G
Dimensional Drawing of SEN12BB-2G

Unit: mm