Specially designed for 10mm high density LED strip like 2216/ 3528 / 2835 240LEDs/M, 5050 96LEDs/M and 3014 288LEDs/M, etc. More workable strip model, please refer to the ‘workable strip list ‘ below.

Models
Model NO. | Types | Description |
---|---|---|
OL11-SEN10XB-2G | Strip to wire | User can attach wire to it |
OL11-SEN10BB-2G | Strip to strip joint | between two strips, without wires. |
Features
- Allow user to attach wire according project requirement.(Wire Color, Cross Section, length,etc)
- Support big current
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very reliably
How to use
Strip end operation
Wire end operation (if have)
Workable LED Strip
Some Common LED Strip that can be connected by this connector.
LED Type | LED lights per meter | Remark |
---|---|---|
SMD5050 | 30~90LEDs per meter | |
SMD2835 / 2835/ 2216 | 30~240LEDs per meter |
All LED strip listed above are Single Color, Non-waterproof with 2 Soldering Pads on 10mm wide FPCB
Technical Data
Item Name | Hippo-M for Single Color 12mm IP20 |
---|---|
Item NO. | OL11-SEN10XB-2G; OL11-SEN10BB-2G |
Pin Pitch | 7.6 mm |
Way of Contact to Strip Light | insulation-piercing contact |
Working Voltage | DC3V~24V |
Rated Current | 5A |
Polarity QTY | 2 |
Housing Color (cap/base) | Transparent / Black |
Min.LED Strip Thickness | >0.2mm |
Workable Wire Gauge (if have) | 22 ~20 AWG |
Workable Wire Cross Sectional Area (if have) | 0.34~0.54 mm² |
Workable Wire OD (if have) | Max 2.1 mm |
Housing Material | PC |
Pin Material | Phosphor Copper (Cu) |
Flame Retardant Level | UL94v-0 |
Remark: The data above are tested under 25℃.


Unit: mm