8mm 3528 LED Strip Connectors is designed for single color light LED strip such as SMD3528, SMD3014, SMD2835,SMD2016,etc. The workable LED density is from 30LEDs to 120LEDs per meter for both waterproof and non-waterproof tape light. IDC technology make it possible to connect strip light with red / blue VHB foam tape on the back. Coming out as terminal without wire, users can DIY not just board to wire as lead connection purples but also board to board jumper with wire in middle.

Available Models
Hippo-M 3528 LED Strip Connector 8mm 2 pin for single color IP20 non-waterproof
Hippo-M 3528 LED Strip Connector 8mm 2 pin for single color IP20 non-waterproof
1. For Non-waterproof
Model NO.TypesConnective Position
OL11-SEN8XB-2Strip to wire for IP20Between strip and wire
OL11-SEN8BB-2Strip to strip joint for IP20Between two strips, without wires


[recaptcha]

Close
Hippo-M 3528 LED Strip Connector 8mm 2 pin for single color IP54 IP65 Waterproof
Hippo-M 3528 LED Strip Connector 8mm 2 pin for single color IP54 IP65 Waterproof
2. For Waterproof
Model NO.TypesConnective Position
OL11-DJN8XB-2Strip to wire for IP65/54Between strip and wire
OL11-DJN8BB-2Strip to strip joint for IP65/54Between two strips, without wires


[recaptcha]

Close
Features
  • Allow user to attach 2 conductor wire according project requirement (Wire Color, Cross Section, length,etc).
  • No need stripping wire insulation when splicing flat ribbon cable
  • No need remove surface coating layer of waterproof strip light
  • Good for high density light LED strip,clear cover won’t mask light of first LED.
  • Gripping LED strip very firmly
How to use

Strip end operation

1-1: Cut LED Strip along the cuttable mark
1-1: Cut LED Strip along the cuttable mark
1-2: Remove protective paper of adhesive tape
1-3: Insert LED strip to strip holder and press cap down
1-4: Finish connection to LED Strip

Wire end operation (if have)

2-1: Insert wire to wire holder of connector and down close cap
2-2: Ensure cap is locked by base of connector
2-3: Attaching Wire Completed
2-4: Connection Completed

Note: Above operation is about non-waterproof type, waterproof version is very similar

Workable LED strip
  • LED Types: SMD2835, SMD3528, SMD3014, SMD2216
  • LED Quantity Supported: 30~120 LEDs/Meter

All LED strips listed above are Single Color, Non-waterproof with 2 Soldering Pads on 8mm wide FPCB

Technical Data
Item Name
Hippo-M for Single Color 8mm
Item NO.OL11-SEN8XB-2OL11-DJN8XB-2OL11-SEN8BB-2OL11-DJN8BB-2
Strip Light ProtectionIP20IP65/IP54IP20IP65/54
TypesStrip to wireStrip to strip joint
Workable Wire Cross Sectional Area0.34~0.75 mm²/
Workable Wire Gauge22 ~18 AWG/
Workable Wire ODMax 2.1 mm/
Polarity QTY2
Pin Pitch3.6mm
Way of Contactinsulation-piercing contact
Working VoltageDC3V~24V
Rated Current 5A
Housing Color (cap/base)Transparent / Black
Min.LED Strip Thickness>0.2mm
Housing MaterialPC
Pin MaterialPhosphor Copper (Cu)
Flame Retardant LevelUL94v-0

The data are tested under 25℃.

Dimensional Drawing of SEN8XB-2
Dimensional Drawing of SEN8XB-2
Dimensional Drawing of SEN8BB-2
Dimensional Drawing of SEN8BB-2
Dimensional Drawing of DJN8XB-2
Dimensional Drawing of DJN8XB-2
Dimensional Drawing of DJN8BB-2
Dimensional Drawing of DJN8BB-2

Unit: mm