5050 LED Strip Connector 2 pin is designed for 10mm wide single color tape light connection, such as SMD5050, SMD5630, SMD2835, SMD5730 and SMD3535, etc. The workable LED quantity is from 30LEDs to 120LEDs per meter. Both non-waterproof IP20 and waterproof IP65 are available including strip-to-wire and strip-to-strip-joint version.
Available Models

1. For Non-waterproof
Model NO. | Types | Connective Position |
---|---|---|
OL11-SEN10XB-2 | Strip to wire for IP20 | Between strip and wire |
OL11-SEN10BB-2 | Strip to strip joint for IP20 | Between two strips, without wires |

2. For Waterproof
Model NO. | Types | Connective Position |
---|---|---|
OL11-DJN10XB-2 | Strip to wire | Between strip and wire |
OL11-DJN10BB-2 | Strip to strip joint | Between two strips, without wires |
Features
- Allow user to attach 2 conductor flat wire according project requirement (Wire Color, Cross Section, length,etc)
- Support big current up to 5A in total
- Good for high density light LED strip,don’t mask light of first LED.
- Gripping LED strip very firmly
How to use
Strip end operation




Wire end operation (if have)




Note: above operation is about non-waterproof version, waterproof types are such similar
Workable LED Strip
- LED Types: SMD5050, SMD5630, SMD5730, SMD335, SMD3535
- LED Quantity Supported: 30~90 LEDs/Meter
All LED strips listed above are Single Color with 2 Soldering Pads on 10mm wide FPCB
Technical Data
Item Name | Hippo-M for 5050 Single Color 10mm 2 Pin |
|||
---|---|---|---|---|
Item NO. | OL11-SEN10XB-2 | OL11-DJN10XB-2 | OL11-SEN10BB-2 | OL11-DJN10BB-2 |
Strip Protection | IP20 | IP65/IP54 | IP20 | IP65/IP54 |
Type | Strip to wire | Strip to strip joint | ||
Workable Wire Gauge | 22 ~18 AWG | / | ||
Workable Wire Cross Sectional Area | 0.34~0.75 mm² | / | ||
Workable Wire OD | Max 2.1 mm | / | ||
Polarity QTY | 2 | |||
Pin Pitch | 5.0mm | |||
Way of Contact | insulation-piercing contact | |||
Working Voltage | DC3V~24V | |||
Rated Current | 5A | |||
Housing Color (cap/base) | Transparent / Black | |||
Min.LED Strip Thickness | >0.2mm | |||
Housing Material | PC | |||
Pin Material | Phosphor Copper (Cu) | |||
Flame Retardant Level | UL94v-0 |
Remark: The data above are tested under 25℃.




Unit: mm